Waschtischarmatur - what to pay attention to when buying


The Content Of The Article:

Waschtischarmatur - what to pay attention to when buying

Wherever water is used, whether in the kitchen at the sink or in the bathroom on the washbasin, fittings in the most diverse designs and variants are necessary.
In addition, each fitting has different features, so it does not matter where the fitting should be installed.
Faucets can either be bought at the hardware store, in specialist shops or conveniently and easily over the Internet. Whereby there is a lot to consider when buying, that is, if you are not so familiar with faucets, you should better consult a specialist.
What should be considered when buying a washbasin faucet?
If the installation of a washbasin fitting is planned in the longer term, then this has the advantage that you can wait for discount offers or offers. Because the costs for a high-quality washbasin faucet are not insignificant, so that it can be worthwhile to wait for various actions of a hardware store. In addition, you then have enough time to think about what the sink mixer should look like, after all, you usually buy this accessory not every day and it should also fit the rest of the interior. But not only that, the choice of faucet also depends on the type of washstand. If the washbasin hangs independently on the wall, it is on the washbasin or is
it integrated in this? For example, if the washbasin is on the washbasin, the fitting must be installed next to the washbasin. In addition, the fitting should then be much higher than a simple fitting. If the washbasin faucet is mounted separately on a vanity top or vanity unit
is no leverage - this requires a special mechanism, which must be available separately. If you also occasionally want to wash your hair at the washbasin, then a fitting with an extendable shower head is suitable.
The design - which fittings are available
In general, the valves are integrated into the housing, that is, it is only a hole needed for installation. However, if the watercourse and operating handle are to be structurally separated, three to four mounting holes are required - one for the left and right watercourse, one hole for the control handles and another if a shower hose is to be installed. This variant is very expensive and of course a matter of taste. The selection is quite large and ranges from cheap to luxurious and expensive.
For conventional use mainly the so-called single-hand mixers are used. In these models, a cartridge is placed in front of the spout, which is responsible for the desired water temperature and quantity. For the purchase, it is recommended to use cartridges with ceramic discs, as they are much smoother and more accurate to use. Another variant would be a so-called two-handle fitting. In this model, cold and hot water are led separately into the spout. If the water temperature is to be mixed, both handles must be pressed. Both models are suitable for washbasins that have a mounting hole. In addition to the conventional models, electronic washbasin faucets are on the rise. These release the water either by means of an infrared sensor or by pressing a button.
Thanks to various designs and designs, there are no desires in terms of bathroom design.

Video Board: [ARTS 315] Contemporary Laments: An Update on the Human Condition - Jon Anderson.

© 2019 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map