Beeteinfassung from willow - make willow fence itself

The Content Of The Article:

Beeteinfassung from willow

When building a flower bed or a vegetable bed, the question quickly arises of a suitable bed frame. A natural design possibility is a bedding enclosure made of willow, which is especially well suited for cottage gardens. With a little manual skill every gardener can build such a frame in no time. Willow is extremely weather-resistant and very durable, an ideal natural product for the garden area. In the same way that a bedding border can be braided out of willow, a willow fence emerges as a borderline and privacy screen.
For the construction of a bedding enclosure made of willow or a wicker fence, suitable willow branches are needed first. If the willow rods should not drive out and the enclosure and the fence should remain the same, then the willow rods must have been dried for some time. As a result, they lose their elasticity, which can be restored later. The following criteria play an important role in the willow branches:
  • Willow is extremely flexible and at the same time also robust
  • Willow rods can often be purchased very inexpensively at construction yards
  • Landscaping companies also offer willow branches quite cheaply
  • Ideal is the average of the willow branches in the period from late October to early March
  • When cut from late autumn to early spring they do not wear foliage
  • Optimum length of the willow rods is between 2-3 m, thickness about 1-2 cm
  • Braided willow branches serve to delineate between beds and the lawn
  • Wickerwork made of willows can be built into large-scale fences
Beeteinfassung from willow
The bed surround made of willow can be used to surround both vegetable and flower beds and create the ambiance of a traditional farmer's garden in the flower bed. Due to the good weather resistance of the willow branches, the gardener will enjoy the border of the bedding for a long time, provided that it has been set up correctly. This small braided bedding enclosure protects the plantings from heavy wind and heavy rain, in addition, the confinement is very decorative and blends harmoniously into natural gardens. The following aspects are to be considered in the bed enclosure:
  • Required materials: Pruning shears, such as finger-thick willow rods, pegs, tether and sledgehammer
  • First create a basic construction
  • Steer pegs vertically into the ground
  • Before tightening the guideline to align the pegs exactly
  • For hammering in the pegs, put a wooden board on its front
  • Brett protects the wooden pegs from damage
  • Turn in between 3-5 wooden pegs per meter of the bedding border
  • The closer the pegs are, the more stable the bed frame
  • However, do not put too tight, otherwise it will be too difficult to weave in the willow branches
Tip: A pasture border made of willow is also very suitable as a border and bank attachment for ponds.
Lichen of willow branches

Willow-bed enclosure

After inserting the wooden pegs begins the phase in which the willow rods are to be woven. The individual rows can be woven either opposite or the thin and thick ends of the willow rods are changed after several rows, in this way creates a shapely braiding pattern. The following criteria are crucial for braiding:
  • Start the beginning and end of the willow branches always near the post
  • If necessary, shorten the rods with pruning shears
  • Always alternate the ends of the rods so that the thicker ends meet the thinner ends
  • Pay attention to a uniform and harmonious overall appearance when braiding
  • After a few braided rows put a wooden board on this and hit it with a hammer
  • By hitting the mesh of the rods is compacted
Tip: If the willow rods are no longer fresh, but already very dry, they are very difficult to bend. In this case, insert the willow rods in a water bath overnight to make them more pliable again.
Make willow fence yourself
A woven wicker fence creates a natural separation in the garden, reminiscent of the structures of old cottage gardens. Such a fence also serves as a decorative screen and creates cozy nooks and crannies in a larger garden. With a low willow fence made of willow, geometrical structures can be taken straightforward. The natural product is weather-resistant and sets natural accents in all gardens. The construction and construction are similar to the bed enclosure, but the proportions change and the construct has to be fastened more strongly. If no budding is desired, then the willow branches must be braided horizontally, so that the material has no contact with the earth:
  • Required materials: ax, wooden posts, thin and foliage-free willow rods for braiding, large hammer, wooden board for impact protection, iron bar or auger, guideline, spirit level
  • Choose sturdy and straight wooden pegs
  • Ideal are pegs of oak, hazelnut, chestnut and robinia
  • For the basic construction strong round poles with a length of up to 2.50 m are optimal
  • Screen walls must be able to withstand strong gusts of wind
  • For the straight alignment tension a guideline as a practical guide
  • With the ax pointed the stems
  • Using a bur or thick iron rod to place holes in the holes makes it easier to drive in
  • Hammer the pegs vertically with a hammer
  • Depending on the length of the pegs an impact depth of 30-50 cm is necessary
  • In between, check the correct alignment with a spirit level
  • Then weave in the willow branches
Tip: If a secure and wind-resistant metal mesh fence is already present in the garden, then the elastic willow rods can be woven into it, while the willow material gives the cold-acting steel a natural charm.
Living Willow Fence

flower bed

If alive willow stakes are used in the construction of the willow fence, then they will eventually spread out under suitable site conditions. In this way, the fence looks even more natural and grows over the years in the air. However, the willow material is only capable of being driven out in vertical wicker fencing. A living willow fence is a cheap and environmentally friendly alternative fence construction. Due to the natural growth arise again and again new willow branches, which can be used and processed in different ways, eg. B. for bedding borders and trellises. The construction of a live willow fence is well prepared and requires regular maintenance after completion:
  • Living willow fence can be used as a privacy screen and property demarcation
  • There are about 450 different types of willow
  • Willow bark can show light yellow, green, purple and red shades of color
  • For limited space, prefer low-growing willow species
  • Willows that do not want to grow replace in a timely manner
  • As with the conventional wicker fence, but use stakes as thick willow rods
  • Insert braid construct vertically, permitting continuous contact with the ground
  • Use willow rods from February to early April, after the strongest frosty nights
  • Water rods first for at least 12 hours
  • Dig deep plug holes to sink the rods one-third into the ground
  • The deeper, the better the rods roost, the more hold they have afterwards
  • Ensure correct compliance with the direction of growth when inserting
  • Allow distances of approx. 40 cm between the rods
  • Then attach wickerwork
  • Mixture of horizontally and vertically braided willow branches possible
  • Horizontal rods do not drive
  • Water regularly and thoroughly the first time after planting
  • Normally, the willow rods will expel within six months
  • Newly growing shoots can be woven into the fence or used for other purposes
The pasture is an attractive natural material, which allows many and especially creative uses in the garden. Braided willow rods can be used to create natural boundaries between the various beds or between the beds and the adjacent lawn area. With the wickerwork, ambitious gardeners can create interesting structures in the bedding enclosure, which harmoniously integrate themselves between the plants. It is always important to have a stable basic construction so that wind and weather can not cause any damage. When creating the fence, it can also be designed as a living construction when the wicker willow rods are stuck vertically in the ground. However, these willow rods must still be relatively fresh, completely dry rods do not drive out. After a long bath of water even slightly dried willow branches can be made flexible and elastic again, so that the lichens are easier to handle. Wicker bed surrounds made of willow and willow-like fences are reminiscent of rustic cottage gardens and convey an original charm.

Video Board: Raised Bed Beeteinfassung aus Palettenholz.

© 2019 All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map