Wall chimney itself


The Content Of The Article:

Wall chimney itself

There are several ways to build a chimney or integrate it into an existing house. Who wants to make it very easy, buys a ready chimney, which is simply used by a crane truck from above through the roof.
Alternatively, you can also put the complete chimney of individual parts together - so the wall chimney itself.
However, the walls are not everyone's thing, because after all, you have to put this stone from the basement to the roof on stone and always integrate the inner tubes for the addition and withdrawal.
The individual steps in the chimney itself wall
Anyone who already has some experience in the walls, for the self-construction of a chimney should not be a major problem. If it is clear exactly where in the house the chimney should find its place, then you simply start in the basement or on the ground floor with the walls.
As mentioned, stone must be set here on stone, whereby, of course, the interstices must be mortared so that the construct is stable. Depending on the working height then the inner tubes come into the chimney, whereby it must always be two. A pipe ensures that the fresh air comes from the outside into the later chimney, so that the fire can burn at all.
The other tube in turn transports the resulting during the burning process
Gases up. The two inner tubes are also provided with an insulating mat. So you work up piece by piece until the roof is reached.
From the outside a wall chimney
Now when retrofitting a chimney is not always given the opportunity to place it in the middle of the house. In this case, the chimney must be built up on an external wall. The individual work steps are the same here, because here, too, piece by piece must be bricked and in each case the Innenrohe be used.
However, you must pay attention to a very good thermal insulation in an outdoor chimney, as this chimney is exposed to an increased extent of the cooling.
Furthermore, a foundation is required here because the chimney must be stable on its own. He is only on one side of the masonry of the building ajar. For the walls themselves come sand-lime bricks, bricks and facing bricks or clinker in question.
Alternatively to a masonry outdoor chimney you can also choose a stainless steel chimney. However, this is not always popular because the metallic appearance does not fit with every facade and is often perceived as visually disturbing. In addition, such an outdoor chimney is a lot more expensive than the masonry variant.

Video Board: How to Insulate Chimney Liner.

© 2019 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map