Build wooden composters yourself - step by step instructions

The Content Of The Article:

If you have a garden, you should also own a composter. Why buy this but expensive, if you can build a wood yourself? Here is a guide.

wooden composter

Composting kitchen and garden waste such as green waste and foliage on your own property has two major benefits: firstly, you do not have to pay so much garbage fees, and secondly, you are creating a high quality and completely natural fertilizer for your garden, So you save twice.

The simplest solution for a compost heap is a simple wood or wire rack from the hardware store, which is usually not very expensive. But visually and practically, these containers are not ideal. Of course, you can also invest in a thermo-composter that looks more appealing. Unfortunately, he is also very expensive. But why buy one, if you can build a composter made of wood yourself? Such a composter is finally quite simple in construction, so that even less gifted home improvement should have no problems to build this himself. With the following instructions, it works in any case.

Material for the construction of a wood composter

For the implementation of a simple wood composter you need a total of 20 boards with a length of 100 cm, a width of 10 cm and a thickness of 4 cm. Opt for a robust and weather-resistant type of wood, even if it is slightly more expensive. For example, larch is particularly suitable for the construction, since you then no longer need to impregnate this wood. If you use other woods, you must protect them with a wood preservative against weathering.

In addition to the wooden boards, you also need some wire mesh and, best of all, square timbers with a thickness of 5 x 5 cm. On tools you need except a jigsaw still a meter and a pencil for marking.

Instructions for building a wood composter

➥ Step 1:

First of all, it is about cutting the wooden boards. For 18 of the 20 boards, you will have to cut out a cutout on the lower edge, and that on both sides. The neckline will be 4 cm high and 2.5 cm wide. The distance to the outer edges of the board must be 5 cm each.


If you use boards of a different size, make the cutouts large enough to match the width of the board thickness and be as high as a quarter of the board width.

➥ Step 2:

Cutting the boards takes the most time. So now you have already made the majority. Now it's time to assemble the composter. The two boards without cutout lay on the ground lengthwise. Then place two boards across it so that the cutouts snap into place. The next two boards are again placed longitudinally on it, then two others again arranged transversely. So proceed now, layer by layer, until all 20 boards are installed.

➥ Step 3:

Then place the squared lumber in the corners to give the composter even more support. A screwing of the individual boards, however, is not necessary because the composter should already have sufficient stability through the cutouts.


By simply plugging together, you can make the container larger or smaller at any time. It can therefore be used flexibly and rebuilt at lightning speed. Reading tip: Implementing compost - That's how it's done.

➥ Step 4:

Finally, it is best to lay the floor with wire mesh so that voles can not penetrate from below.

Video Board: How to Make a Compost Bin from Pallets.

© 2019 All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map