Conifer fertilizer - application of Heckendünger


The Content Of The Article:

In the spring, the snow, which is left over from winter, melts and often severe damage to hedges and various woody plants is visible. In particular, the upper leaves are dried up and affected. Particularly affected are evergreen species such as viburnum and cherry laurel. In the spring, the plants should be vigorously cut back and fertilized.
Hedges on busy roads
High traffic roads are sprinkled with salt due to the smoothness. As a result, hedge plants, which are planted directly on roads and sidewalks, particularly affected by road salt. When the frost subsides and the soil is no longer frozen, you should first water the plants very heavily to rid the plants of the salt. Once the last remaining salt has been eliminated, the hedges should be stimulated to grow using a special conifer fertilizer.
If the frost-free weather starts, the discharge spray can be started. This eliminates pests that have wintered on the plant, and promotes the breaking up of the buds. The applied oil film ensures that the existing pests are stifled.
Coniferous hedges as privacy screens
Most people appreciate their hedge, as they provide a perfect privacy and the garden ideally from the neighboring property. The following plants are particularly popular for this purpose:

  • evergreen plants
  • conifers
  • conifers
The popularity of this hedge family is not only due to the privacy, but very dense hedges offer, especially in autumn, an optimal wind protection. In addition, vehicle noise can be reduced on busy main roads. The noise of playgrounds and kindergartens can be dampened accordingly. Thuja is the optimal solution for this purpose.
Thuja hedges are particularly easy-care and robust. In addition, in a Thuja hedge only fertilizer fertilizer is introduced in the year of planting in order to produce the appropriate growth. The strong natural growth of the plant makes the further fertilization superfluous.
Exhalation spray against insects and inclusions
In spring, the bursting of the buds of ornamental and fruit trees, a Austriebsspritzung is required. This ensures that egg deposits and wintered insects are flushed out of the plants and destroyed. Further prevention measures are ants and caterpillars rings on the trunk of the respective plants. As a result, hedges and trees are protected from uprooting insect pests from the soil. As soon as the frost is over, it is advisable to use a bio-tree coating which protects the bark from bursting and preserves its inherent elasticity.
After spray spraying and further precautions against pests, regular fertilization of trees and hedges is advisable. Hedge or conifer fertilizer is just as important as the application of compost, mulch or hay to support the natural resilience of the hedge family. Due to the minerals, the plant is resistant to pests, vermin and diseases.
Tapping samples make infestation by pests visible
The Sitki spruce is a very common pest. It can also distress vigorously growing hedges. After mild winters, the risk of infestation is particularly great. The pest is green and has red eyes. He nestles in the plant interior and overwinters in it. Experienced hedge and tree owners therefore carry out occasional knocking tests as early as in the autumn, as a result of which the pest can be detected and combated at an early stage. To do this, take a plain white A4 sheet and hold it under a branch that is inside the tree. If more than six pests fall on the underneathed leaf during branching, then the hedge or tree should be treated with appropriate lice.
Evergreen hedges are planted in the fall
Evergreen hedges and plants should also be treated with conifer fertilizer. The planting takes place in the optimal case in autumn. At this time, the best conditions for optimal growth are offered. When planting in the fall, of course, can be started immediately with the fertilization of the plants.
The fertilizer used often contains a fungus that combines with the roots of the plant. The fungus then expands, which causes the roots of the fertilized plant to grow rapidly. Due to the artificial enlargement of the roots, the plants can absorb significantly more water due to the larger area of ​​the roots. This also results in greater nutrient uptake and stronger and consistent growth. Coniferous fertilizer has a long-term effect, resulting in a continuous improvement in nutrient uptake.Therefore, the special fertilizer in most cases only needs to be used after planting. In isolated cases, however, can be re-fertilized once a year. In particular, evergreens, which are planted in planters and pots, should be re-fertilized regularly because the ingredient of the fertilizer does not remain in the pot. In general, the plant reveals the degree of fertilization to the respective gardener. The plant grows little and irregular should be re-fertilized. If the crop sprouts and grows well, the plant gets enough nutrients and does not need to be fertilized continuously.
Coniferous fertilizer is very different in price and composition
When buying conifer fertilizer, there are some things to keep in mind. Helpful hints on the composition and the price are available on numerous comparison portals on the Internet. In addition, expert gardeners and botanists can give helpful tips for the fertilization and protection of coniferous plants. In general, not only the price, but also the composition is crucial. Some conifer fertilizers contain more nitrogen, others more sulfur. Here it is the plant, not the price, that determines which fertilizer is the ideal solution. A pack of conifer fertilizer costs about five euros in the trade. This price range is usually sufficient in terms of conifer fertilizer and should not be exceeded in any case.
Worth knowing about conifer fertilizer soon
  • Conifer fertilizers often contain a fungus that binds to the plants. Due to the connection and the massive enlargement of the fungus, the surface of the roots of the plants is also increased at the same time.
  • Of course, the roots can absorb significantly more nutrients over a larger surface, so that the whole plant can be much better supplied with the important nutrients.
  • Conifer fertilizer can also have a very long-term effect. Once applied, it permanently provides for a massive improvement in the nutrient supply of the individual plants and can thereby help them to better growth.
  • As a rule, the conifer fertilizer and the rear fertilizer only have to be applied during the new planting. Sometimes, however, it can also make sense to rework something once a year so that you can continue to guarantee the best possible nutrient supply for the plants.
  • You should also regularly provide evergreen plants in troughs or planters with the conifer fertilizer, so as to be able to provide better growth in the long term.

Conifer fertilizer - application of Heckendünger

FAQ - 💬

❓ What is the best fertilizer for conifers?

👉 Conifers are not heavy feeders and need only an annual application of a general, complete garden fertilizer such as 10-10-10 or 16-8-8, or a top dressing of well-rotted manure.

❓ What fertilizer application method is best for corn?

👉 Corn roots quickly grow into the soil between the rows. Sidedress N fertilizers early in the growing season to avoid root pruning. Apply nitrogen fertilizer during early cultivation. Application of N fertilizers with irrigation water is a convenient method and allows split applications to improve N use efficiency.

❓ What is the best method of applying fertilizer?

👉 Fertilizer is applied in bands near where developing roots will easily reach it; either to the side and below the seed rows, slightly below the seeds, or in between rows. A common practice is to band fertilizer 2 inches to the side and 2 inches deeper than the seeds or plants.

❓ What is the best fertilizer for corn plants?

👉 Well-rotted manure compost, green manure crops or similar materials will improve water holding capacity of the soil and is recommended for best crop production. Three to four bushels of well-rotted manure or similar material per 100 feet of row would be adequate when worked into the soil prior to planting.

❓ What is the best pH for conifers?

👉 pH 6.5The optimum pH for most conifers is around 5.5; most broad-leaved trees grow best a pH 6.5. This phenomenon is due largely to reduced ability of conifers to take up nutrients as pH increases.

❓ How do you treat conifers?

👉 Removal of competing vegetation within 30cm (1ft) each side of the hedge, feeding the trees with a general fertiliser in late winter and mulching the base of the hedge with a 8cm (3in) layer of well-rotted organic matter should also help.

Video Board: .

© 2024 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map