Paint and paint the door frame


The Content Of The Article:

Paint and paint the door frame

Normally, the door frame is the same color as the door leaf, so it is usually white or in a shade of brown. However, the trend for wall design is increasingly moving away from the sterile white, to the color accents that are also taken up in the door frame.
Of course, there is also the possibility to set contrasts with the door frame. Acrylic or synthetic resin based paints as well as transparent lacquers and glazes are available if the door frame is to be given more gloss or a protective coating.
Painting and painting the door frame - preliminary work
First, the door must be unhooked and the door frame thoroughly cleaned. With a special basic cleaner that works very well and with a microfiber cloth disappear the last dirt particles. To ensure good adhesion, the old surface is roughened completely with a fine-grained sandpaper. In between and after finishing the sanding work, a vacuum cleaner will do a good job. The last paint dust disappears when wiping with the moistened microfiber cloth. In order to prevent the inhalation of this dust, it is recommended to wear a mouthguard, which also prevents any escaping vapors later during priming and painting. Furthermore, the room should always be well ventilated.
The work begins with the masking of the surfaces to be painted. The paper from the roll must be glued exactly to the edge of the door frame. This is the only way to ensure that after removing this masking tape
really only the door frame is painted and not beyond. The floor is protected with newspaper or foil. Pretreatment with a primer later achieves a smoother brushing. The use takes place after indication of the
Manufacturer, usually a thin spread is sufficient. The primer must first dry well before it can go on painting with the actual door frame. When using 2 in 1 paints, a primer is unnecessary.
Paint and paint the door frame
The paint can is best opened with a wide screwdriver. Before painting, the color must be stirred well, this is a wooden spatula. When applying with a brush, it may be that the brush hair leaves small stripes. Foam rollers or sprayers distribute the paint better. It is recommended to wear protective gloves to avoid skin contact.
After immersing the brush in the paint, this is first something stroked, so that not too much color adheres to him. This can be done at the can edge or on a paint pan. Even when using a foam roller, the paint must be evenly distributed and not too thick on the roll. It is always only one direction, best from the bottom up. If the first coat does not cover - the quality of the paint is crucial - a second coat is necessary. The first coat should already have dried well.
After completion, the masking tape should be removed carefully. If you wait until the paint is completely dry, it may be that part of the paint is torn off the door frame. To prevent this, a previous scoring with a utility knife also helps.
Brushing and painting the door frame is associated with a greater effort, the result after a careful procedure, the effort quickly forgotten.

Video Board: How to paint a door frame or door jamb - (correct technique).

© 2019 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map