Build firewood shelter yourself - a construction manual


The Content Of The Article:

Build firewood shelter yourself - a construction manual

You have just bought a fireplace, which will be used extensively next winter? Then it's time to get firewood.
Most of this is sold too wet, so it can only do a good storage time. In addition, prices fluctuate seasonally. If you do not have a place where you can stock the firewood, it would be convenient to build a firewood shelter.
Building instructions for a firewood shelter
It is very advantageous if the firewood shelter stands on a wall of the house, which protects it on one side from the weather. At such a location usually flat ground is available on which you can build your structure.
  • basic construction
A firewood shelter can be quickly built from wooden slats that are connected to a special angle system. This DIY kit consists of eight galvanized wooden connecting angles made of steel. You only buy roof battens of the appropriate size, which can be assembled up to a length of two meters with this system simply to a cube without side panels. There are screw holes for connecting screws provided. The finished cube can be placed on a level surface in the garden or on a house wall.
There are matching pegs for ground mounting. What you do with the open pages depends on the local weather conditions. The firewood should be safe from wind and weather
but as well ventilated as possible. You can simply throw a tarpaulin over this quick-to-erect firewood shelter, or turn the shelter into a solid structure with profiled boards.
Another possibility is to make a base plate made of Euro pallets. Here you can either choose disposable plastic pallets or provide the cheaper wooden pallets with a wood protection. Around this floor, post shoes are hacked into the ground, picking up the vertical frame woods. On one side, these frame timbers should be a few inches higher so that the roof forms an oblique surface from which water drains.
Where the water should drain from the roof, comes to the site. If the shelter stands against a wall, the roof should fall forward, so that the water is not behind
running down the wall. These frame timbers are topped off by horizontal beams (simply screw them together with steel angles).
  • roof structure
Now you have a square frame for a firewood shelter. It is provided with a roof at the top: To do so, install rafter beams on the front and rear beams at a distance of about 40 centimeters. The rafters should project forward about 20 centimeters, so that later a roof overhang results. The roof is now covered with horizontally mounted formwork boards, then roofing felt comes over these. If the firewood shelter is standing against a wall, the roofing felt is pulled up a little way up the wall so that all the water drains forward. Also at the front she is pulled over the edge and fastened. The attachment is easy and fast with special roofing nails. Again, the pages are planked more or less densely depending on the expected adverse weather conditions.
If no house wall is available and you want to build a freestanding firewood shelter yourself, they basically do the same thing, you just have to attach posts to the back side as well. The shelter gets then also back and on the sides a Holzbeplankung. And the floor must first be smoothed with the help of a spirit level, so that the shelter is safe. Incidentally, as you start home improvement, you can find building instructions for firewood shelters on the Internet, detailing each step of the process.
split wood
If you buy firewood in round logs, you should chop it before stacking to make it square
becomes. The round logs roll easily and are therefore very difficult to stack. This can be done with an ax or with a log splitter. This is an electrical device that allows wood to be split easily and effortlessly.
Fast alternatives for firewood storage
If the construction still has to wait a bit because of time constraints and you can just buy firewood cheaply, there are the following possibilities for quick housing:
  1. They simply cover the wood with a tarpaulin, there are even special tarpaulins for wood, they cost only a few euros. Leaning against a wall are practical wooden piles, which are bought as a kit and quickly become a firewood rack with just a few woods.
  2. Also a firewood rack made of plastic or a Vorstelldach for the house wall can be ordered in the catalog, Westfalia has, for example, several such ideas in the offer.

Video Board: How to Build a Firewood Shed By Yourself.

© 2019 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map