Build firewood shelter yourself - a construction manual


The Content Of The Article:

Build firewood shelter yourself - a construction manual

Heating with firewood not only creates a very cozy atmosphere in the room. Many people also feel reminded of childhood, and also brings a fireplace extra comfort.
In many ovens, the tea water can be heated or the baked apple braised, which is delicious and comfortable. However, in times when fuel prices continue to soar, wood heating is also an economic factor. In order for the wood to develop a high calorific value, it wants to be treated properly.
Lower the moisture content of wood
Only properly treated and stored firewood heats and burns optimally. It must be stored dry. Since storage space is expensive, firewood is sold too damp rather than too dry. Moisture measuring devices bring you fast certainty: wood can be burned from a moisture level of 17 percent without fear of sooting the fireplace. Wood fresh from the forest has to dry for about 2 years before it reaches these levels. But also purchased wood wins in dry storage: with 5% less moisture you achieve 20% more heating power.
It is best if the logs are not stored too narrow stacked in a covered place. So the moisture can best escape from the wood. Of course, the most beautiful is a location to the south, in addition, the campground has a good
Provide air circulation. Once you have found the optimum space for the wooden shelter, you should straighten a non-paved floor as much as possible, using a rake and spirit level.
Build firewood shelter yourself
A simple, well-functioning shelter can be quickly assembled from wood itself. First, you need some europallets. These can be obtained from appropriate dealers, sometimes in hardware stores, sometimes they are also offered used. Euro pallets are made of wood and plastic. The latter are mostly made of polyethylene, an absolutely moisture-resistant plastic.
  • Base plate made of europallets
What europallets you choose is a question of price (wooden europallets are considerably cheaper) and convenience: wooden europallets need to be treated with wood preservation and they must also be stored on paving stones or bricks. Even treated wood would soon be damaged by moisture without this constructive wood protection. If you use plastic europallets, you can lay them directly on the floor. Thus, the decision is also a question of optics, even a small detail can be annoying if it catches the eye every day. Because the stones under the wooden pallets can be seen, also the plastic europallet flashes with the front under the otherwise completely made of wood and filled with wood construction. However, they are available in black and gray, the dark version would attract little attention on a dark garden floor, the bright version could also with the steel color
harmonize visible sleeve of the post carrier.
The Euro pallets are laid out as the floor of the future wooden shelter, wooden pallets on six evenly distributed paving stones per pallet. The pallets can be connected together, which increases the stability of the construction. For wooden pallets, you can screw flat metal connectors into the lower frame timber, and you can connect the plastic pallets with almost invisible twisted wire.
  • Frame construct made of squared timbers
Now the frame comes from square timbers (at least 7 x 7 inches desired height, for example 2 meters). The front woods are cut a few centimeters shorter than the front ones, so that rainwater can drain from the future roof. The best way to cut wood is to temporarily put them in the sleeves and attach the horizontal frame wood with clamps. So you can paint the cut under the frame wood.
If you have not bought pressure impregnated wood, the squared timbers are painted with wood protection after cutting. At each corner of the pallet comes an impact floor sleeve in the size of squared lumber. These post carriers are easier to insert if you pre-punch the spot with a pole. Then the ground sleeves are hammered in and aligned with the spirit level. Now you can put the squared timbers in the sleeves, align them again with the spirit level and fasten. Now the horizontal frame timbers are placed at the front and at the back and connected with heavy duty angles to the posts.
  • planking
The freestanding shelter can and must be closed at least partially, depending on the location behind and on the sides. How tight this closure is depends on whether the shelter is at risk of a rainstorm or not. On the other hand, as much air as possible should come from all sides to the wood so that it dries as quickly as possible. The planking of the pages mediates between these two demands.Reasonable walls can be made of tongue and groove boards or single boards with gaps of several centimeters in between.
  • cover
On top of the frame timbers come rafters, square timbers of at least 6 x 6 centimeters are suitable, they are attached with about 20 centimeters protrusion front and rear. On the rafters come sheathing boards in roof width. Then the entire shelter can be made weatherproof with wood preservation glaze if you have not used pressure impregnated wood everywhere.
At the very end, the overhanging roof is covered with roofing felt. Cut the roofing felt so that it covers the roof area and can be turned over at the sides so far that the fronts of the roof timbers are covered. It is simply nailed to the roof surface with roofing nails. First, a nail is placed on the edge of the roof about every 40 centimeters, then nail the envelopes to the rafters and side beams.
Tip from the editor
  • If your stock of wood is so small that building a shelter is not really worthwhile, there are ready-made firewood shelters or firewood shelves to buy.

Video Board: How to Build a Firewood Shed By Yourself.

© 2019 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map