The Content Of The Article:
Paint furniture without sanding?Anyone who has ever inherited an old piece of furniture or bought it at the flea market knows the problem. Most of the pieces are well preserved except for the paint, but the old paint really does not fit into the decor.
What can you do there?
There are probably different options, depending on which paint was used on the old piece of furniture. Specialized retailers have some products that help to restore the old furniture to new heights without having to sand down the entire surface.
Furniture cleaning fluid
All surfaces must be cleaned with furniture cleaning fluid. One distinguishes different tinctures, those for light and for dark furniture and an extra tincture for cherry wood. To clean it is best to use polishing wool, as well as for subsequent dry rubbing.
Furniture polish lacquer
On the cleaned furniture, when they are completely dry, applied furniture polish lacquer. This is done with a soft cloth and in a circular motion. It takes little by little until the surface is completely smooth. If the old furniture is painted with shellac, you use a special shellac refresher.
Finally, the furniture is treated with a so-called care polish, so that it shines in fresh luster. In this way, furniture can be treated, in which only the paint looks no longer beautiful. Where larger scratches or broken corners are present, of course, must be professionally repaired.
With correct damage to the good piece is not much to achieve with this method.
Sand the surface
Many furniture that should get a new color, does not have to be sanded. So that the new color keeps better,
But it makes sense to grind them. It also does some work, but not nearly as much as when everything has to be sanded down. For sanding you use sandpaper with a 150 or 240 grit. When brushing usually two layers must be applied so that everything is properly covered.
If the surface of the furniture has severe damage to the paint, usually only helps to grind everything evenly. For a simple piece of furniture, this is still quite simple, albeit very time-consuming and dusty. But when it comes to embellishments and inlays, then it is really difficult. Then usually only helps the transition to a specialist, possibly even to a restorer. Anyone who cares to work up the good piece really should get the advice of a professional anyway. One should consider, that one needs a separate room, as well as for grinding, as well as for the paint or Lackauftrag. A garage or an unused basement space are available, but not everyone has.
Anyone who is not sure whether the furniture can handle the desired color or paint and what it looks like in the end should try it out in a place you can not see. As you can see the result and can also try something. For solid wood furniture, the back offers, if you want to put the part behind a wall. Often you have to come up with something and experiment and improvise something. In principle, just try and see how it gets.