Soften watering - With these 5 tips it works

The Content Of The Article:

Irrigation water has too high a degree of hardness depending on the region. So here are a few tips on how to soften irrigation water.

From 8° dH is spoken of an increased degree of hardness

From 8° dH onward, it is generally spoken of an increased degree of hardness and, as of 15° dH, of a hard water. Water, whose hardness is above 21° dH, you should generally not prepare for the plant supply.

But how do you find out how hard the water is? Quite simply: in the garden market so called indicator sticks are available. With these you can easily measure the hardness of your water. If the test shows that the water is too hard, then you should use the tips below to soften the irrigation water.

5 tips on how to soften irrigation water

Tip 1 - Hang peat bags in the irrigation water:

You can, for example, soften irrigation water by filling the water in a suitably large water container and hanging in a bag of peat. For this purpose you should ideally fill the peat in a disused nylon stocking. Depending on the container size, you may also need to use several peat bags.

Tip 2 - Add wood to the irrigation water:

Alternatively, you can also soften the irrigation water by placing a larger piece of wood in a water container.

Tip 3 - Add Vitamin C:

Water of irrigation becomes noticeably softer if you add pure vitamin C to the water.

Tip 4 - Mix tap water with well water:

On top of that, you can also mix conventional tap water with pure well water. Thus, you also achieve a much better degree of hardness.

Tip 5 - boil water:

In small quantities you can boil tap water for the purpose of plant irrigation also at 60 degrees. For larger quantities, this method is certainly too expensive due to the resulting electricity costs.

Video Board: 8 Secrets To Keep Your Lawn Always Green And Healthy.

© 2019 All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map