Glazing technique for wood and wall - instructions

The Content Of The Article:

Glazing technique for wood and wall - instructions

If you do not always want to live with monochrome walls, one of the most beautiful ways to bring variety to the wall is the glaze technique.
Even wood can be glazed, here are the key points that should be considered around the glaze:
What is a glaze?
As a glaze in the jargon each non-opaque paint is called. No matter if it is a diluted colored varnish or a dispersion paint, which is made translucent by dilution. Ready to buy, there are wood stains, which can be tinted transparent or slightly colored. The glazings for the wall are made at home by thinning the wall paint.
Glazing technique on the wall
If glazing technique is used in a room wall, the different translucent layers give much room for own design and experiments. It is not only fine gradations in the opacity possible, the color nuances can be varied in intensity and then be added to each other very different by the order. In any case, you will get a very individual wall if you work with glazing technique. It's hard to imagine other creatives creating a similar wall.

  • You make the glaze by mixing emulsion paint with a glaze binder, water and color pigments. How much water is added depends on the desired transparency. Recommended is a
    Add between 5 and 6 parts. The addition of a lot of pigment can not only make the color stronger, but also make the mixture more opaque. So it may take some time to try it out until the perfect glaze is mixed.
  • The base coat can be made with the particular emulsion paint if the wall needs a new base color. To paint the ready-mixed glaze use a laser brush.

  • If you want to work in several colors, the wall is first glazed in one color. Then the next tint comes over it. By using the laser brush, irrespective of the color and intensity of the glaze, further effects can be achieved: A rather calm image is obtained when you paint by painting an infinite symbol next to the other when painting.
  • Of course, you can also put one vertical line next to the other or one wave next to the other or one cross next to the other. Also, work with multiple shades can be varied by applying a new coat after the previous one has dried, or wet to wet.
  • In the
    Working wet in wet, the individual colors in the spectrum should be further apart if noticeable differences are to be created.

When it comes to glazing technique, there are so many possibilities that it is really recommendable to create a sample surface on which you can try different designs first. This can be a simple plasterboard, but then you have to provide it with the primer (or wallpaper), which is also on the wall.
Further design options
From the infinite selection of ideas, the following are briefly sketched:

  • A natural sponge or a wound cloth can be used to dab or blur the glaze or to change it by rolling it over with the sackcloth. In order for this to have an effect, a stronger shade usually needs to be used.
  • A starry sky can be designed especially well in glazing technique. For example, starting in a corner of the room different layers of glaze are applied one above the other, less and less towards the other corner. Part of the ceiling in the opposite corner remains white, which reinforces the plastic structure. When the paint layers have dried, the stars come up to the ceiling. There are ready stars to buy, you can also buy one
    Use gold color soaked motif stamp.

Glazing technique for wood
The usual glaze used on wood is to protect the wood. This is often done without changing his appearance. This wood preservation glaze is then transparent. But also wood can be designed by the glaze: There are finished wood glazes to buy, which has already been added some color. So the wood can be slightly tinted - but the wood grain still shines through. This type of glaze with a white color component is especially beautiful. It also often helps to integrate a lot of wood in bright rooms.
Editorial tips

  1. You can also dilute a wood varnish yourself with the appropriate transparent glaze binder and then paint your wood using glaze technique. This can be a decorative treatment for damaged wood that does not look good without painting.
  2. The procedure is similar if wood imitations are to be produced by means of basically opaque lacquers. First the wood is painted flat, then the varnish is applied in glaze technique until the different layers artfully imitate a wood grain.For example, this is an interesting way to transform dark, dark-looking wood into bright.
  3. If you use glazing technique, you should always consider the basic laws of color design in the living space. After the primary colors thus selected, the complementary colors are selected.

Video Board: Glazing Color Wash Faux Finish Painting by The Woolie (How To Paint Walls) #FauxPainting.

© 2019 All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map