The Content Of The Article:
High quality bathroom fittings for the upscale furnishing styleIn addition to the ceramic, the bathroom fittings are the real eye-catcher in a bathroom. While the ceramic can be kept in an appealing design, but is not over-paid, bathroom faucets have the potential to attract the attention of all bathroom visitors.
The great thing about the bathroom faucets of today is that they can serve different tastes.
So there are classic variants based on earlier times, of course, as well in combination with advanced technology. In addition, there are also bathroom fittings for modern design needs and not least also those that meet the upscale furnishing style and represent truly high-quality components in the bathroom.
The single-lever mixer - bathroom faucets at the highest level
Gone is the time for double-acting thermostatic valves where hot and cold water have been regulated separately on small leaves to the right and left of the curved water outlet. Meanwhile, the single-lever mixer has established itself.
A single-lever mixer consists, as the name implies, of only one lever, which is used for both the hot and cold water supply. Depending on the lateral lever movement, the water temperature is set; The further to the left the lever is, the hotter the water, the further to the right it is adjusted, the colder water flows out of the tap. The pulling up of the lever induces a more or less firm water jet.
A novelty are of course not such bathroom fittings
more, but they have now been adapted to the high standards in the bathroom.
So far, single-lever mixer batteries have always been mounted on the washbasin, so they can be found today as surface-mounted or flush-mounted versions for fastening to the wall.
The Aufputzausfertigung the single-lever mixers, instead of on the sink, bolted to the plaster or the nasty sitting on the wall. High-quality bathroom faucets of this model are designed in such a way that mixing lever and water outlet are mounted side by side.
Sub-plugs hand-held mixers use a similar one
Fastening, thermostat and water outlet strategy, however, they visually look a bit more noble. Because the screw is not visible and was not hidden with a cover, but is located under the plaster or tiles. So it seems as if the bathroom faucet will spring out of the wall like a spring. A visually really high quality detail in the bathroom.
High quality in temperature regulation
High quality in the bathroom can be seen not only in the appearance, but it is also induced by technical refinements in the use. And in this context, temperature regulation is becoming increasingly important.
Who does not know the problems of two-lever thermostats that have always opened when setting a pleasant water temperature. Either the water was too hot or uncomfortably cold. Here modern thermostats offer an optimal solution. Because they are usually constructed as transversely mounted cylinder, complete on both sides with a regulating device.
On the left side, there is a temperature scale, which invites you to set the desired temperature precisely. On the right, however, the water pressure regulation is guaranteed. In this way, the perfect temperature and beam intensity are always guaranteed with high-quality bathroom fittings.
Sensors upgrade bathroom fittings again
From the sanitary areas of public buildings, they are now known to everyone: bathroom fittings that trigger the water jet by means of a sensor. In the meantime, this technology has even found its way into the private household and upgrades the bathroom fittings beyond measure.
The principle of operation is the same: A sensor is integrated in the water outlet of the bath fitting, which reacts to movement. If this sensor perceives a movement in its immediate vicinity, it releases the water jet. An automatic shutdown ensures that no unnecessary water is wasted.
As practical as this high-quality technology is with bathroom fittings, it is only suitable for use with wash basins.