Build the laundry shaft yourself - diameter, dimensions & costs


The Content Of The Article:

Build the laundry shaft yourself - diameter, dimensions & costs

A laundry shaft in the house spares laundry mountains in the bath, in the bedroom and in the children's rooms. You put the dirty laundry in the door to the shaft and below it arrives at the washing machine. That's a handy thing.
However, such a shaft also brings dangers, especially for children. It should be well planned and executed in such a way that no one can be harmed. In principle, it is not difficult to build a laundry shaft yourself. It is best if it is planned in a new building with the same. However, it is also possible to retrofit it later. This is associated with a lot of work and dirt, but can be done if there is enough space.
planning
  • The ceiling opening for the laundry shaft is about 350 x 350 mm in size. This space must be available.
  • If the shaft is to go over several floors, the openings should be exactly on top of each other! This is the easiest and the pipe costs are the lowest.
  • Branches and arches increase the price. Covering the shaft is often useful, especially if it is visible in the room. So you do not see the attachment of the pipes where they run through the floor.
  • For stainless steel pipes, a fairing is almost too good. Then you do not see the shiny tubes at all.
Diameter / Dimensions
  • The tubes are available in different lengths, mostly
    1 meter, 2 meters and 0.5 meters.
  • A diameter of 250 mm is usually sufficient. Normal laundry fits in there wonderfully. It gets tight with down jackets or quilts, but they are not so often washed and can be transported in the normal way. More than 300 mm diameter is not needed for private use.
  • The opening should be about 250 times 350 mm in size.
costs
  • The cheapest is, if you can install the laundry shaft itself.
  • Pipe costs for 1
    Meter tube: plastic about 60 euros, stainless steel just under 100 euros.
  • Purring pipe with purr connection: plastic about 180 Euro, stainless steel about 220 Euro.
  • Shaft bend 30 ˚: plastic around 60 euros, stainless steel around 90 euros.
  • The manhole covers cost almost the same, around 50 to 60 euros.
  • Not to forget the cost of clamps, wall brackets and the like. Depending on the number of tubes and the length of the shaft, another 100 to 200 euros will come together.
  • A good door also has its price. It must be absolutely tight, so that no noise or odors can flow through the house. Depending on the material, such a door can cost around 300 euros. But there are also cheaper models.
  • The cost of the installation does not apply to self-construction. This is a big job, because artisan lessons are known to be expensive.
Conclusion
A laundry shaft is a practical thing, especially for large families who produce a lot of laundry. Anyone who takes the shaft into account right from the planning stage saves a lot of dirt and work later on. Whether a retrofit pays, everyone must decide for themselves. You can certainly educate your children so that they bring their laundry in the washroom or at least in the laundry basket.
Editorial tips
  1. To avoid accidents, especially with children, the door must be lockable! Not only for small children, the pit is a danger. Of course, they can crawl in and crash. Children have the best ideas and so many cats have already crossed the floors in this way. That does not have to be.
  2. The laundry shaft should be centrally located, easy to reach from bath, bedroom and children's rooms.
  3. For safety reasons, stainless steel tubes are the better choice. They do not burn. Plastic on the other hand already and by the chimney effect of the shaft
    The fire can spread throughout the house.

Video Board: How to Install a Basement Laundry.

© 2019 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map