The Content Of The Article:
Grease stains, limescale residues and lubricants - what can be quickly and easily removed with clear glass with a suitable cleaning agent can be a problem on frosted glass. Glass cleaner on a chemical basis does not tolerate this. Likewise, the chamois leather can permanently cause visible damage to the frosted glass. However, the cleaning of the frosted glass does not have to be expensive and expensive if the following tips are taken into account. Because with these simple removal is easily possible even with heavy soiling.
types of glass
In contrast to clear glass, cloudy or frosted glass is usually roughened on at least one side to create the satined effect. It is this roughened side that is sensitive to the wrong means and materials. Aggressive or abrasive products can damage the treated glass side and create permanent stains that can not be removed. At these points the satin finish was destroyed. It is therefore important to clean properly from the beginning.
Tip: If it is double-sided smooth milk glass, which receives its dull effect by an admixture and not by the roughening, nothing must be observed during the cleaning.
To clean the frosted glass, do not use abrasive, rough materials. Also, the chamois leather must not be used. Instead, soft, lint-free cloths should be used. Ideal are dishes and microfibre cloths. Newsprint, which some swear by when cleaning clear glass, is also to be treated with caution. Although it can be dispensed with detergent on him, but it can quite come to an undesirable Abfärben. The result would be frosted glass with gray stripes, which come about through the printing inks.
Aggressive chemical cleaners Non-biological or degradable glass cleaners should never be used on the frosted glass. They damage the satin finish, often lasting, creating unsightly stains and streaks. Nevertheless, it is usually unnecessary to invest in expensive special cleaners.
Instead, lukewarm water is usually enough to clean the satined glass. Wiped with a damp microfibre cloth, light soiling can be easily removed. For more stubborn stains, however, the following means can be used:
- soft soap
- dish soap
- Vinegar or vinegar essence
- common salt
- Cleaning alcohol
Remove grease stains
Even the natural skin fats are enough to leave stains on milk glass. Creams, fat splashes or greasy films resulting from cooking and roasting can also adversely affect the appearance. To remove this type of soiling, a mixture of soft soap and lukewarm water should be used on the frosted glass. The soft soap is gentle on the glass but still effective and therefore ideal. As an alternative to the soft soap, degreasing detergent may also be used. After the grease stains have been removed by soapy water and a microfiber cloth, wipe with clear water again. Finally, the satin-finished glass is rubbed dry with a lint-free cloth. Lubricants and limescale are thus avoided.
Remove and avoid lime residues
Especially in the shower it can come on the cloudy glass to stubborn limescale. But even by wiping with hard water, so when cleaning, they can arise. For the removal here is best suited vinegar water. White vinegar or diluted vinegar essence are ideal. When cleaning the milk glass, a microfiber cloth is provided with the vinegar, which has been diluted with water, and the crusts are rubbed off with pressure. If this procedure is insufficient, the dosage of the vinegar can be increased. Alternatively, some salt or potash is suitable as an additive in the self-mixed cleaning solution.
In order to avoid limescale from the outset, it should be wiped dry immediately after contact with water and even if moisture condenses on the glass. A pointed vinegar in the cleaning water also prevents the stains.
Tip: As a last resort should be considered cleaning alcohol, which has a high soil dissolving power, the glass but can also attack.
Greasers are not only eye-catching on clear glass, they also point to frosted glass and disturb the appearance. In order to prevent them from cleaning, we recommend the following procedure:
- 1. Wipe the window with warm water or, if necessary, lather or soak with the cleaning agents mentioned above.
- 2. Clean with appropriate microfiber cloth in circular motions and with adequate pressure.
- 3. Rinse or wipe with clear water after using cleaning agents.
- 4. Immediately wipe dry, damp glass with a lint-free cloth or tea towel.
Due to the special nature of the milk glass, it is sensitive, but attracts dirt and stains. Since persistent contamination is difficult to remove in some cases, it is better to resort to a damp microfiber cloth. Even greasy films, such as those produced in the kitchen by cooking and frying, can be easily and even eliminated in the water without any addition, if they are wiped off the milk glass at least once a week. Those who often resort to warm water and microfibre cloths can usually save themselves time-consuming and exhausting cleaning and also cleaning agents.
Discoloration and clear spots
If the frosted glass is slightly darker and less cloudy after cleaning, this is completely normal. After it has completely dried, the satined side will return to its usual look. The situation is different with clear spots and spots. These may be fat residues, such as fingerprints. Likewise, however, the surface treatment could also be damaged. If the matt, frosted appearance does not return even after cleaning with soapy water or combining with salt, the latter is likely. Under no circumstances should it then be resorted to the scouring rag or aggressive cleaning agents, perhaps to remove the supposed stain yet. Such an approach would only worsen the problem and increase the damage.
Who wipes the milk glass often with water and a microfibre cloth, can save the use of cleaning agents usually quite. On the other hand, simple remedies such as vinegar and soft soap help to clean the frosted glass thoroughly against grease and lime.