Mold control in the apartment


The Content Of The Article:

Mold control in the apartment

If mold fungi occur in an apartment, no matter where, rapid action is required.
The fungus must be permanently removed, but it is also very important to find the cause of the mold.
This is the only way to ensure that in the future the apartment will not be attacked by mold again and thus pose a health risk.
In principle, mold can be produced wherever it is moist. This is especially the case in the bathrooms or on the corners of the rooms, which are bordered by external walls. In most cases, improper ventilation or heating is the reason for the formation of mold. In some cases, it is also structural defects or cold or thermal bridges, which favor the formation of mold.
Mold can usually be recognized by mildew on the wall or the ceiling. However, the spores, which are distributed invisibly throughout the room, are considered dangerous.
There are different types of molds that produce various poisons. Many of them are classified as harmful to health, which is a major health problem for allergy sufferers, small children and sick people.
Steps of mold control in the apartment
As mentioned, the cause for the formation of mold must first be discovered. You can eliminate molds by draining the source of moisture. This will give the mold
deprived of the livelihood. It is crucial that the entire loaded material is removed. In the worst case, a professional renovation must be made.
In order to give a first aid to the foxing, cleaning agents and disinfectants with or without chlorine can help. They are applied with a sponge and rinsed with plenty of water. However, the success of such measures is usually short-lived, because faster than you think the mold is visible again.
Then only helps to remove the wallpaper completely, the affected areas with an appropriate means for the
Wash mold removal and then apply an antifungal mushroom paint. This avoids that new mold can form. Once these measures have been taken, the wall can be re-wallpapered.
However, if the causes are more profound, moisture in the masonry is responsible for the formation of mold, then only a complete sealing of the masonry will help. However, this should always be done by a specialized company, because the layman is quickly overwhelmed with the measures to be taken.
Moisture can enter the masonry via the floor slab of the building or through the basement walls. Here, a shuttering and draining must be done so on the one hand no new moisture can get into the house and on the other hand, the existing moisture is removed from the masonry.
Possibilities to prevent the mold
In order to prevent the formation of mold in an apartment, you should take into account some important details. So it depends on the right ventilation and heating, which plays a major role especially in winter.
The apartment should be ventilated several times a day for three to five minutes. So a draft must be created so that the old used air can escape and new fresh air can enter. It is also important to properly heat, because warm air can absorb much more moisture than cool air.
By airing, the warm, so the humid air, transported outside and can not settle in the room, on the walls. It is also crucial that the furniture, which are on the outer walls should be at least ten inches away from the wall. This is the only way to ensure that air can circulate behind the cabinet.
You should go along with that
Avoid drying laundry in the apartment. They release additional moisture into the room air. If this can not be avoided, it is especially important to have good ventilation.

Video Board: Woman takes control of apartment mold problem.

© 2019 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map