The Content Of The Article:
Movingui - wood, parquet, profileMovingui is also one of the woods that originate from tropical West Africa. In particular, the trees occur in Gabon and Ghana, on the Ivory Coast in Cameroon, Nigeria, Liberia and Equatorial Guinea.
The botanical name is Distemonanthus bentamianus and the trees belong to the legume family or Caesalpiniaceae.
The stem form of the Movingui is provided with a predominantly straight stem and is characterized by a cylindrical shape. Although the root starts are very weak, they can still reach heights of up to two meters.
The diameter is usually about 80 centimeters, in some cases, diameter of more than one meter can be achieved. The maximum knot-free length is 20 meters.
Movingui wood: color and structure
The wood of Movingui is divided into the sapwood and the heartwood. The sapwood is characterized by a very bright yellowish gray color. It is usually around three inches wide, only very rarely can it be wider.
The heartwood stands out clearly from the sapwood, even in the fresh state of the wood. It is usually pale yellow in color, but can also reach a shiny golden yellow or even a lemon yellow. When exposed to light, it darkens slightly.
The pores in the wood of Movingui are medium, sometimes coarse. they lay
scattered in the wood. Occasionally, yellowish to grayish deposits can occur in them. The fine rays of wood can be seen quite well on the smooth tangential surfaces. This is not least because of the arrangement, which resembles several floors. The memory cells are distributed around the pores, in the form of eye-shaped rings, which are quite bright. They are also very numerous in the growth zones, where the memory cells connect to bands, which, however, run quite irregularly.
Although the memory cells are present in large numbers, they can actually be seen in the wood of Movingui only on the smooth cross sections.
The fiber flow is characterized by the alternating rotation, which can sometimes occur quite clearly. This can result in a very pronounced gloss strip. Likewise, the growth zones in the cross sections become clear, where they are characterized by a darker latewood. However, they do not affect the entire wood image of Movingui wood.
Overall, these properties result in a very light wood, which is only moderately equipped with pores. The eye-catching gloss effects also make an assignment to the so-called satinwoods possible.
The moderately heavy wood of the Movingui has quite good strength properties. They often correspond to those of oak. When wet, the wood can be processed very well, in the dry state due to the gravel deposits should only be done with tools that were made with carbide.
Surface treatment and use of Movingui wood
The surface treatment is also very simple, so that a variety of options are available. These include clearcoats, glazes, topcoats or polishes. The wood of Movingui can also be waxed.
Glazes are especially recommended for outdoor use. Although they affect the natural color of the wood, but they also protect it from rain and sunlight. On topcoats, which are to be diluted with water or very light, should be avoided, as they can lead to the leaching of the wood.
The wood from Movingui is mainly used as solid wood. Here it can be used outdoors as well as indoors, for example for parquet. As a decorative veneer, this wood is also very good.
Whether frame structures for windows, doors and gates, for boat building or furniture making - the wood from Movingui
Due to its good properties, it can be used in a variety of ways.