The Content Of The Article:
Clean plastic windows properly, cleaningOf course, it is desirable that newly installed plastic windows last as long as possible and remain attractive. For this, however, it is necessary to subject them to a regular thorough cleaning, which, however, must be suitable especially for plastic windows.
The first cleaning after installation
Immediately after installing the plastic windows you should not immediately approach with cleaning agents, but let the internals have the time to fully cure.
After one day, however, the first thorough cleaning of the plastic windows is necessary. The window installation leaves traces; Installation foam, mortar or residues of paint or plaster must be removed.
Although plastic is relatively resistant to chemical burns caused by aggressive building materials, but the window fittings in case of late removal of such contamination can damage it and thus impaired function.
However, it is important when cleaning that you do not make the mistake of assuming that even aggressive cleaning agents can help against aggressive build-up residues. Such detergents, which are mixed with, for example, alcohol or strong acids, attack the plastic and lead to damage.
Instead, you should resort to an ordinary soapy water. Hand-warm water with a little detergent is usually sufficient to solve such contamination.
If the installation residues can not be completely removed, however, there are special cleaning agents for cleaning window windows at the window manufacturer, but also in all common hardware stores. These remedies are composed in such a way that they are on
gentle way to remove even the most stubborn dirt without attacking the plastic.
However, the window manufacturers also know about the problem of stubborn dirt from the window installation. To protect the frames of the plastic windows are therefore often provided with a protective film.
These keep the largest contaminants away from the frame. The protective film fulfills its purpose, but you should absolutely make sure to remove it at the latest 14 days after installing the window.
Otherwise, condensation may cause the film to become brittle or, so to speak, to "burn in", meaning that residue-free removal is only possible with aggressive means. To remove the protective film, soapy water is also suitable; never use pointed objects, such as a spatula, because they cause irreparable scratches on the plastic.
Regular cleaning of the plastic windows
Modern plastic windows can now be installed for up to 50 years. Of course, this desirable goal presupposes that the windows will receive appropriate care and regular cleaning is of course part of it.
Through evaporation in the interior, smoke and vapor deposits, contamination from rain from the outside, dirt settles on the plastic frame. Fortunately, plastic is a material that is not immediately destroyed by such adhesions. Nevertheless, especially in the case of car exhaust or cigarette smoke, relatively aggressive gases act on the plastic and deposit on it.
Therefore, once a month a cleaning of the plastic windows from the inside and outside should be done to rid the material of the damaging influences.
As with the initial cleaning after installation, you should use for regular cleaning only lukewarm soapy water. At best, the plastic window is then rinsed again with clear water and dried. This prevents soap residue from remaining on the plastic window.
For persistent soiling, the special plastic window cleaning agents from the manufacturer are also available for regular cleaning. These differ depending on the provider. An exact user manual is always printed. It is strongly recommended that these are strictly adhered to in order to avoid overdosing with certain substances, as damage due to excessive dosages can not be ruled out.
In addition to the cleaning but also a regular care of plastic windows is a guarantee for a long-term beautiful appearance. Therefore one should inform oneself extensively about the professional care of plastic windows.