The Content Of The Article:
Post shoes for pegging & setting in concreteIt does not matter if a wooden swing is to get a firm footing or whether the terrace roofing has to find its anchorage on the ground, whenever wood wants to be made into a stable framework, the question arises for the best mounting option.
Post shoes have found their right to exist here. They are available in such different finishes that no post form or background is disregarded.
Post shoes made of concrete for insertion
If the ground on which the wooden beams are to be attached is soft and yielding, then the idea of simply letting the bare wood into a concrete bed comes up. However, the wood quickly becomes rotten and porous at the areas in contact with the concrete, and a collapse of the entire construct is more than likely. If you want to avoid this danger, you should definitely refrain from setting in wooden beams.
Therefore, there are special post shoes for this use. These are actually concrete blocks with two or more long metal rails protruding from the surface. For fixing a small pit can now be excavated, which is so deep that the concrete block in embedded
Condition flush with the edge of the hole.
Now, just below the upper limit of the pit filled with liquid concrete and thus the post shoe firmly anchored in the ground. After everything is well dried, come
now the wooden post in its place, which of course lies between the metal mounts. Large screws connect the frame to the post, which is henceforth stable and secure.
Post shoes are also available for pegging
Under certain circumstances, it is not possible to use post shoes in the above-mentioned manner. Then, for example, when an already paved terrace is to be covered. After all, you do not want to demolish the entire floor covering.
But also for this there are post shoes, of course in an oriented appearance. Although the metal poles for fixing the wooden posts may not be missing here as well, the concrete block at the lower end is omitted. Instead, this construction closes down with a large stainless steel plate that can be pressed onto the floor. The appropriate drilling devices ensure that large screws anchor the post shoe in the hard ground. The attachment of the wooden beam is then compliant with the post shoe for soft floors.