The Content Of The Article:
Properly delete - ideas, tips & tricksAs with all renovations, it is important that you paint properly. There is a lot to consider. Only those who do it right will enjoy their fresh rooms after completion.
So that you really only scratch the area that is planned, the rest is taped. This saves the long removal of paint from, for example, sockets, door and window frames, rubbing strips and the like. Also touch points to walls, which should receive a different color, must be taped. Anyone who wants to paint a wall in different colors or set accents, of course, must also mask these surfaces. Best suited for this is painter crepe.
Preparation for painting
Before you can start painting, there is still a lot to do. Superficial dirt can be removed with a damp cloth. Even mold must be eliminated. Cracks have to be compensated, using putty. Deep background must be applied before painting. The preparation also includes the masking, as described above. If you paint large areas, the floor should be covered. This is especially important with carpet. If furniture is still in the room, it naturally also needs protection. If the cover foil is attached with adhesive tape, it can not slip.
All unsustainable substrates should be pretreated with solvent-free substrate. He gives the surface
A primer makes sense, as some stains such as nicotine, soot, fat, salt or water repeatedly hit. Only special insulating paints help. For individual surfaces, there are different colors. These must necessarily match, therefore always read the sales pack correctly, where it is written, what can be used for what. The packs contain all the important product information, such as substrate preparation, paint setup, suitable processing tools, cleaning, thinning, spread, safety advice, and more.
Differences in wall color
There are some differences in wall colors, not just in color. The quality is very different, between some are worlds. You recognize that
Difference to the imprints of the paint container. "Washable" can stand on any color, even if it is not right. Only in connection with Euro-Norm a binding quality statement is made. The paint labeled "Wash Resistant to Euro Norm" must withstand a defined scrubbing cycle at least 1000 times. That's quality then. Without the assurance, the color usually already colors from the wall, which one leans against.
The opacity is also evaluated. Class 1 is the best, more than 99.5 percent is covered.
Cheap colors usually lack white pigments and binders. They are replaced by fillers, ie chalk, lime and talc. As a result, opacity is lost. Missing binders cause good adhesion to be lost. It can lead to cracking and peeling. It is not for nothing that wall paints have a connection between quality and price.
The actual painting
Roller or brush should be moistened before immersing in the paint. First, you paint the seams, so the transitions between wall and ceiling, corners, baseboards, door and window frames and surfaces around switches and fixtures. You start by painting on the ceiling. You roll with straight, overlapping webs, so that the paint is even. To achieve a uniform color image, the brushing direction is important when working with the roller. Distribute the color first vertically on the coating section and then horizontally, but without taking in any new color. If the ceiling and wall are to be laid out in different shades, paint the upper corner of the wall with the color of the ceiling (1-2 cm) and coat it with the wall paint after drying. You only have to take 2-3 mm
the upper corner, so you get a clean transition even in bumps. It should not be rolled too fast, then the paint often splashes away. If possible, tape should be removed again when the wall color is still wet, so it is easier to remove it again