The Content Of The Article:
Change roller blind beltThe roller shutter belt is quickly broken, because usually just a moment of carelessness and the belt jumps out of its holder.
If he has been frayed for a long time, then he can tear through just as quickly. At this point it is helpful to know how to quickly change the roller shutter belt with a little manual skill.
Step by step to the new roller shutter belt
First, the lining of the belt winder must be unscrewed. Then the complete rewinder is taken out and the roller shutter box is opened. Now the belt is rolled up by hand. So that now the shutter can not immediately fall down again, it is best to clamp a wooden wedge directly between the rolled up shutters and the roller shutter box. According to the length of the old webbing now a new webbing is cut to size.
Afterwards take the strap winder and remove the old strap. Now the new one is wound on the spool and the end slit open and connected to the retaining pin. The webbing is now passed through the slot on the shutter cladding. The top
The end of the belt is then wound up and hung back into the roller shutter reel. For this, however, the coil must first be turned on by hand. Also this strap end must be slit again and then attached to the retaining pin.
Now the wooden wedge can be taken out. The belt should now wind up automatically. Helpful
It is possible to let the strap slide slowly through his hand so that he can not fall down together with the shutter. Finally, only the cover of the roller shutter box must be screwed on again. Also, the cover of the belt box can be attached again.
So hard? There are videos on the Internet
If this description seems too extensive and incomprehensible at first glance, you can also get help on the Internet. On relevant websites, there are numerous videos that explain exactly how to work with the roller shutter belt. So you can use the pictures and videos step by step to replace the belt itself and does not have this done by a costly craftsman. It's easier than manners.