The Content Of The Article:
Replace and clean roller shutter beltHappy are those who appreciate the windows of a roller shutter. Because what many consider an unfavorable eye-catcher is deliberately the most effective way to darken a room and keep out the sun's rays and heat during the summer.
Tambour door belt change made easy
If the roller shutter torn or fibers are on him, an exchange is almost impossible to get around. As a preparatory measure, therefore, the old belt must be removed. For this you open the roller shutter and wedged it with wood in the open position. Subsequently, the lower belt winder is screwed on and the old belt removed. At the coil in the roller shutter box you also solve the piece of belt to be replaced.
Armed with this one goes to the purchase of the new belt, which should have the same width as the old piece. In the
Length is the rule of thumb that the window height is multiplied by a factor of 2.5.
To install the coil of the belt tensioner is brought into tension and locked in this position, the belt to the retaining hook
and wound up. Now the structure comes back into the intended housing, which is closed again at best.
Also on the upper coil are attachment hooks, where the free end of the roller shutter belt finds its place. You are welcome to do two or three revolutions manually to ensure sufficient strap length. If the wooden wedge is removed from the roller shutter while holding the roller shutter belt and it is slowly drained, the belt replacement is already completed.
Cleaning instead of exchange - that's how it works
If the roller shutter belt is not broken, but only dirty, you do not have to replace it. He is washable. This is done in the same steps as in the complete exchange. The loosened belt then receives a special treatment with all-purpose cleaner, carpet foam or textile cleaners for hand washing. As an alternative method is baking soda or the power of oxygen in special Oximitteln. In no case, however, may the roller shutter belt be placed in the washing machine!