Apply and apply rolling plaster, remove correctly

The Content Of The Article:

Apply and apply rolling plaster, remove correctly

Rolling plaster is a convenient way to give the wall an interesting decor. The rolling plaster forms the last wall layer, so comes on the finished plastered wall.
Rolling plaster can be applied to any smooth wall that is sound. This means that cracks should be removed beforehand, in the old building renovation also loose plaster is removed before and the resulting depression refilled. Even small areas such as old dowel holes must be removed depending on the pattern of the rolling plaster, otherwise they might attract attention.
Roll plaster is available as synthetic resin plaster, synthetic resin plaster with silicone resin, silicate plaster and mineral plaster. If the wall is plastered with synthetic resin or silicone resin plaster, only suitable roller plasters come into question. On mineral or silicate plaster with only a little dispersion mixture and on mineral plaster, any mineral roll plaster can be applied. Mineral plaster contains no solvents and forms a vapor-permeable layer, which can provide a good indoor climate.
The trial paint
You should first create a large sample surface at the workplace, for example a plasterboard. At this area you can try out the planned structure, with a little imagination you can also imagine how the room will look when the whole wall surface will be covered with the structure. You can also adjust how fluid the roller coaster is. You can also try the
desired structure can continue without starting. This is important for large wall surfaces, because you should only apply as much plaster at a time as you can structure in about fifteen minutes.
Prepare wall
The wall must be smooth, level and undamaged. This may require, above all, preparatory work when roll plaster is to be applied to an old building wall. Then all old dowel holes must be closed, even broken plaster areas must be refilled before. When the substrate is ready, it should be primed (suitable for the later plastering material). Then all surfaces are covered, which should get no plaster, now you can start.
For many roller plasters, the previous application of a primer is recommended, which ensures a uniformly colored background. It can be bought to match the plaster and is applied with a roller or paintbrush, for the corners you need a brush. The primer must then dry for a few hours.
Apply rolling plaster

  • Rolling plaster will be finished in
    Bucket sold or as a powder for mixing with water.
  • For the powder you need an extra bucket and a stir bar for the drill.
  • The rolling plaster from the bucket must also be thoroughly stirred before application. The material should have a creamy consistency, as liquid you make it, depends on the pattern you want. More solid material is visually more robust, with liquid rolling plaster very fine layers are applied and designed.
  • When mixing, the plaster can also be tinted immediately with the pigments available from the manufacturer, which has the advantage that later with small scratches in the wall no white color appears.
  • The plaster is now applied area by layer with the appropriate roll (always as much as can be structured at once in 15 minutes), thereby already a structure is created. Especially with thicker coatings, you must pay attention here to a uniform layer thickness.
  • Then it can be structured further, depending on how you planned it while trying it out.

Roll plaster on wallpaper
Roll-on plaster can be applied to damp-repellent taped wallpaper, and you will of course receive (or retain) a wall that does not allow moisture to pass through. If you want the wall to breathe (and a suitable plaster background is given), the moisture-resistant wallpaper must be removed before applying mineral roll plaster. In any case, must be removed
Wallpaper that dissolves in the sample with a wet sponge already. She would not keep the roller trim.
Remove rolling plaster
Mineral Rollputz can be removed by soaking it with water. Then it can be scraped off with a spatula, similar to a wallpaper. The remains can be washed off with a sponge or a brush. The more synthetic resin dispersion is involved, the tighter the company becomes. An electric spatula will then be necessary, but the work can be extremely tedious. In extreme cases, it only helps to fill in the entire wall.
Editorial tips

  1. The rolling plaster can later be overcoated with the appropriate color to the material, another means of design are templates that keep individual areas free of plaster. This can cause stripes on the walls and around elements such as sockets, even a whole zoo on the nursery wall is conceivable.
  2. Alternative decorative plasters are available as textured plasters that still offer many options. Even woodchip in liquid form can be painted on the wall today.

Video Board: How to skim coat using paint roller trick- Getting rid of Knockdown Texture.

© 2019 All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map