The Content Of The Article:
Fasten shower rod uncomplicatedWhether as a holding device for hanging the shower head, as a fastener for a shower curtain or simply as a handle to facilitate the entry into the shower and to be safer, shower rods have many uses.
However, they want to find their attachment and not only must be stable and resilient, but should be able to be reversed at best and not require too much fuss.
To meet all these requirements for a shower rod attachment, there are in the specialist trade, primarily realized in the home improvement market, different shower bars with different fasteners. And fittingly, you will also find the necessary equipment for the assembly here.
Screw shower rod and dowel
The common variant of the shower rod attachment is certainly the use of screws and dowels. Since this attachment strategy is equally well-suited for all shower rod applications, a corresponding repertoire of rod designs designed in this way offers itself.
In practice, however, the drill must be used here. Such shower rods usually have an angle, which is mounted on the wall side and in which the corresponding Bohraussparungen are integrated. These are drawn to the bathroom tiles and now this with the drill to body. Then the supplied dowels disappear in the drill holes and the shower rod can be supplied with screws of their use. To cover the unsightly screws, most shower rods have a matching cover clamp
Among all conceivable mounting options, this form of shower rod attachment is the most stable, which can withstand even the heaviest loads. However, the tapping of the tiles requires an immense handling skill with this tool because of their smoothness. And left behind are the extinguishers, which can not be easily closed after removing the shower rod.
Shower rods with telescope for clamping
If you do not want to do the driller with your bathroom tiles, you can alternatively use clamp variants on the shower rods. Indeed
they need imperatively two opposite walls and are therefore only for the shower rod for curtain attachment a choice.
However, the distance between the walls is quite indifferent. Shower rods of this edition are namely so-called telescopic rods and can be extended to any length. This is done by turning the two rod elements against each other, which are thus not only brought apart, but get a stable locking in wall support by firmly turning further.
Vacuum solutions for shower rods
Since telescopic poles for clamping only a special use occasion are conducive and the drilling is not necessarily worth considering for everyone, there are now shower rods whose attachment principle uses a vacuum.
Here is located at both attachment ends of the shower rod a large, circular area, which is lined with a silicone material. Visually, these breakpoints resemble a suction cup and they work the same way. However, significantly improved.
After the substrate on which the shower rod is to find its support, was cleaned with water and a little alcohol and degreased, set the break points flat. Now you operate a kind of closure, which is moved to close to the left and to open to the right. This rotational movement develops a negative pressure and the suction cup is absolutely securely attached to the desired location.
Since this device is extremely stable, you can attach both the shower head as well as a shower curtain. Even heavy weights withstand such a shower rod attachment, so this is the optimal solution for handholds.
The principle is as simple as it is effective. Also, for the generation of negative pressure no great effort is needed, so that even the weakest lady can attach a shower rod in this way.
If the shower rod is to be removed again, it is very easy to open the retaining cap, air penetrates and the structure is released. There are no traces left behind.