The Content Of The Article:
Shutter control by radioToday, more and more new buildings are equipped with an electric roller shutter control.
But even older houses, where the shutters are still opened and closed by hand, can be retrofitted with an electric roller shutter control. This is not only interesting, but especially for elderly or disabled people, who find it increasingly difficult to operate the shutters by hand.
Electric blinds controls
- Electric shutters can be easily operated via a switch. Often, however, they are manufactured in programmable versions in which the time at which the shutters should open and close can be entered into the device. Here, different times can be entered for the weekdays and the weekend, so that the automatic opening of the blinds does not interfere with sleeping at the weekend.
- The biggest savings in heating costs can be achieved by always closing the blinds at dusk. Since the
However, as the twilight time changes during the year, some devices allow you to enter the location of the building. Then the controller continuously calculates the current one
Twilight time and closes the shutters accordingly.
- An electric roller shutter control can also be like that
be programmed to regulate the room temperature by measuring the current indoor temperature and compensating the difference to the desired temperature by opening and closing the shutters.
In an electric roller shutter control, there are basically two options. In the wired solution, a switch or timer is installed on the wall, which is connected to the motor of the shutter control by a cable. Somewhat more comfortable is the roller shutter control by radio, because the remote control can be taken to any place.
The shutters can then be operated from the sofa or the breakfast table without getting up. The operation by radio is therefore particularly interesting for people who are no longer so mobile. But also for the operation of roller blinds, which are necessary for computer workplaces, the operation by radio makes sense. Then the shade can be optimally adjusted from the workstation to prevent reflection of the sunlight on the screen.
A wireless control also has the advantage that in this variant, no switch must be mounted on the wall and therefore the cost of installation is less than in the wired solution.