The Content Of The Article:
- 1. plan swimming pool in the garden properly
- 2. Swimming pool for the garden: the right shape and size
- 3. Maintain and clean the swimming pool properly
A swimming pool is the dream of many garden owners, because it serves to relax and increase the well-being. Before the dream becomes reality, however, one should stop and inform oneself thoroughly. If you know exactly what you want and really need, you can save a lot of money. From planning to care - we have summarized the three most important tips for you here.
1. plan swimming pool in the garden properly
Before you start construction, it is important to ask the local building authority if you need to meet certain requirements. Swimming pools with a volume of up to 100 cubic meters are usually free of license, but the regulations vary depending on the state. You should also check the prescribed distance to the neighboring border. On some properties, the construction of a swimming pool due to agriculture, conservation or nature reserves is even prohibited. It is also recommended to include pools with pool enclosure in the building or glass insurance. Damage caused by storm or hail will then be replaced by insurance.
Once the legal framework has been clarified, planning can begin. As a location for the pool you should choose a ground-level area of your garden. On the south or southwest side in full sun, the pool water stays warm the longest in summer. Make sure that no trees are in the immediate vicinity - so you avoid the constant fishing of leaves. Depending on the location and available space, the size and depth of the pool must be set individually. If you have the right plot size, you should place it so that it does not disturb the garden design too much - a place at the garden border is definitely better than a central place directly behind the house. The other option preferred by most pool owners is to integrate the swimming pool into the adjoining terrace, which together form a pleasing unit.
A private pool in the garden brings on hot summer days, a welcome cooling off
2. Swimming pool for the garden: the right shape and size
The choice of your swimming pool depends on the size of your garden, but also on how much you want to spend on it. Pool manufacturers today offer pools of all shapes and sizes. The most cost-effective variant are deployable pools made of polyester. These are easy to transport and also quickly set up. Even inflatable pools of PVC and polyester, which are already available from about 50 euros to buy, are an affordable alternative for insecure garden owners. If you discover that you have built your pool in the wrong place, a change of location is easily possible.
If you prefer a real swimming pool completely embedded in the ground, you should expect significantly higher construction costs, since the earthwork alone costs several thousand euros. Ground-level pools can be installed as prefabricated plastic basins or made on site individually from concrete. The prices for plastic basins are depending on size between 10,000 and 15,000 euros. Concrete pools with a special coating can also easily cost more than 40,000 euros - here you can calculate with dilapidated design including pump, filter, heating and lighting as well as simple cover with around 1000 euros per square meter. In principle, it is easier to isolate ground-level pools than above-ground pools, so that a part of the construction costs can be saved by lower heating costs. However, the financial outlay is worthwhile only if you know exactly that you will use your swimming pool regularly over the next few years.
Important: For planning and execution, always consult an experienced specialist company and think about the annual operating costs already during the planning phase. They depend heavily on the use of heating and are therefore very variable. As a guideline for a six-month heating season, one can count on about 15 to 30 euros per cubic meter. The heating costs are by far the biggest cost factor, but can be significantly reduced with a pool cover.
3. Maintain and clean the swimming pool properly
If the pool is finally in the garden, only the water is missing. To fill the swimming pool, it is best to use tap water - it is usually cleaner than, for example, groundwater from your own well. Note that you must take care of the hygiene of the pool on a regular basis. To protect your swimming pool from dirt, you should cover it with a tarp or a mobile shelter every night - this also keeps the water warm longer. To keep the pool water clean, it has to be circulated and filtered with a powerful pump.Keep in mind that the water pump also needs regular maintenance.
To spend time in your swimming pool with a clear conscience, you first need the right amount of chlorine, flocculants and algae preventatives. Also regularly check the water quality and pH of your pool. Here it is important to pay attention to the dosage instructions. Too low a pH will cause the pool fittings to corrode more quickly. Too high a pH leads to mucous membrane and eye irritation.
Regular cleaning of the filter system is also a must. Change cartridges and sand filters regularly - corresponding accessories can be found in relevant specialist shops or on the Internet. For the removal of coarse dirt, a vacuum cleaner is highly recommended. Foliage and other floating contaminants can be automatically extracted with a so-called skimmer. The pool stairs should be cleaned with a hand brush as soon as it becomes slippery.
Bear in mind that a swimming pool must also be prepared for the winter: all pipes, supply lines and the pump should be anhydrous, otherwise there may be damage due to freezing water. Some water should remain in the pool itself to maintain its stability and protect the foundations and pelvic walls from frost damage. As a rule, the pool should be emptied and covered up to about a third below the usual waterline.
The water from the swimming pool is not allowed to be pumped into the sewage system or even into a body of water. A popular option is to trickle the water on your own property. It is pumped away so slowly that it can completely seep into the ground. Important: The chlorine content must not exceed 0.1 milligrams per liter, otherwise the plants and the soil life can be damaged. So you have to stop chlorination a few weeks before draining the water.