The Content Of The Article:
Painting tiles - instructionsRemoving tiles is a tedious and time-consuming act, not to mention the noise and dirt that comes with it.
So who wants to have a new look in the kitchen or bathroom, without having to work this has to come up with something.
To bring new colors in the tiled rooms, you no longer need to remove old tiles tedious. With color, with special color of course, can be made all sorts of things. With a little skill and self-confidence, you can paint over the tiles yourself.
To paint over tiles, the surface must be clean and free of grease. So, the tiles must be thoroughly cleaned with a soap or vinegar cleaner. After that, the tiles must dry. Then the tiles are roughened. For this one uses the well-tried sandpaper or even better, sanding fleece from the specialized trade.
Of course, holes in the joints and tiles need to be repaired before cleaning. Silicone joints are to be removed completely because no color is left on them. In addition, it is better to tap the transitions to the floor and fittings with painters crepe.
The paint job
The paint application consists of a primer and a final coating, preferably an epoxy resin paint. This consists of the two components paint and hardener, which are mixed together. At the dealer you can mix colors, almost all shades are available. Draw these special colors
characterized by special durability, resulting in bath
and kitchen is of course important. However, once mixed, the paints are only stable for a certain amount of time (usually 6 hours) until they begin to harden.
It is important to follow the processing instructions for painting the tiles, especially for reasons of health protection.
Primer and finish coat
The primer is first painted. For this purpose, use a paint roller. The corners are worked with a brush. Do not forget the joints! The primer must dry overnight. For very dark tile colors, it may be necessary to apply a second primer layer to completely cover the color. Also for this, the first primer must be completely dried, otherwise the first color layer is removed again. Then the primer should be sanded completely evenly, so that the final paint holds permanently. Then the paint is applied. Again, paint roller and brush are used. You can also make only a primer and two layers of paint, but the paint is more expensive.
Once all surfaces have been painted and dried properly, the joints can be sprayed with silicone.
If you do not bring the new surface into contact with sharp means, it will hold years effortlessly in the same beauty.
For 1 to 10 m², about 250 ml of primer and about 1.5 l of tile varnish are required.
Important when painting is that it airs much, because the vapors of the paint are not harmless. Fast can make you dizzy or you can get headaches from it.