The Content Of The Article:
Remove foxing on the wallOften you only notice it when you slide a large cupboard or another piece of furniture forward: moldy stains on the wall! Mold is not only a visual defect, but on the one hand a sign of too much moisture and too little air exchange.
On the other hand, mold (even if one sees only mild foxing) is simply harmful if it gets into the respiratory tract. And he inevitably does that when he is in the living room. However, you can eliminate foxing in the early stages quite well. However, it is also important to turn off the actual reason for this: moisture.
How is the foxing?
In each apartment creates a lot of moisture: by planting, bathing, showering, cooking, sleeping (sweat) and so on. Therefore, especially in rooms or on walls with cold bridges there is an acute danger of mold. The water vapor can not escape. In old buildings, this is often the case, especially if subsequently good insulating windows were installed. But even in new buildings that have not dried out properly or are constantly wrong or not aired, it can lead to foxing.
Remove foxing with home remedies
Most of the time, treatment with alcohol or vinegar essence is enough. Whether the wallpaper is to be saved (if available) is questionable. At first you can try it one by one, only the wallpaper carefully
rub. However, if it is larger stains, it is better to remove the wallpaper and thoroughly rid the underlying wall of the stains and then possibly with a fungicidal agent
to treat. Even a solution made from 10% alcohol and 90% water is suitable for mold removal.
Elimination of stains by special means
Commercially there are sprays, which eliminate mold and permanently prevent or prevent further infestation. However, these in turn include chemicals that may not be safe for your health. Often chlorine bleach is included. Then it could be problematic to stay in this room in the next time. Especially with such dangerous means it is safer to consult a specialist.
Prevent foxing from the outset
All furniture should always be at least 10 cm away from a wall. This is especially true for exterior walls or those that are poorly insulated. Even large pictures or heavy curtains hinder the heat transfer from room air to the outside wall. Incidentally, correct and regular ventilation is also essential to prevent further mold growth. Even a bed, which is worked on the wall during the day, can quickly lead to foxing. No wonder: the sweat accumulates in the mattress at night, which then precipitates on the wall as mold.
Finally, it should be noted that if you do not change the ventilation behavior, the mold will always form again. Meaningful is always the so-called shock ventilation. Incidentally, the humidity should best be below 50% if possible. Even the right heating plays a decisive role in the case of mold. A further measure would be to repair the thermal bridges. But this is then accompanied by appropriate structural measures. In principle, one should occur mold to the landlord.