The Content Of The Article:
Walk-in shower - easy access, easy showeringIn the search for new elements in the bathroom you will inevitably stumble over the walk-in shower. Because it is probably the epitome of modern technology in combination with chic design in the bathroom.
Hardly a high-quality bathroom, which is not a walk-in shower his own name.
This principle is just as easy to design as to implement. Only low spatial requirements must be met, so that a walk-in shower can be integrated into a bathroom. And then this shower concept scores with a unique moisture resistance and accessibility in perfection.
Construction of a walk-in shower
Normally, the entire bathroom, including the shower area, is tiled in the case of a walk-in shower. Although you can achieve optical accents through different tile designs, but not with a complete shower cabin including shower tray.
However, there are some important things to keep in mind about the floor: In the shower area, a drain must be integrated at the appropriate place. In the area around this drain, a slope is staged downstream. This is done either by prior consideration when laying screed, or by targeted use of more or less tile adhesive.
This particular bottom shape means that the water does not accumulate on the floor and does not flow into the interior of the bathroom, but actually takes on a natural movement towards the drain.
So that there is no backwater, the outflow must also below the
Tiled something deepened. A direct horizontal course of the drainpipes is not a suitable condition for the walk-in shower. However, sanitary professionals are well informed in this regard.
Side lock of walk-in shower
If the floor has been constructed in accordance with the concept of a walk-in shower, then it is far from over here. Finally, the shower area must also be separated laterally from the rest of the bathroom. This opens up the alternative choice between shower cubicles or Abmauerungen.
Shower cubicles for walk-in showers are mostly two meters high and
are equipped with metal rail housings and transparent inserts. At the bottom is a siliconized end cap, which closes quite watertight. In this way, the walk-in shower can be completely closed, retains the moisture inside and is equipped by a door, optionally with sliding element, a hinge opening or hinged doors.
Contrary to this, however, one sees in many bathrooms, the walled-down variant of the walk-in showers. There are two sides of the wall surrounded by masonry, which is completely tiled. The still open side receives a door modeled after the shower cubicle.
The last possibility in connection with the walk-in shower in combination with the walled version is the so-called walk-in shower. It has an individual wall shape with an inward projection and thus induced shower table, so that they can do without a door entirely.
Ground-level shower: compulsory element in the barrier-free bathroom
For reasons of design and modernity, walk-in showers are good options. But they offer even more advantages that cover not only stylish but equally functional components.
Of course, a bathroom should not only look smart, but also be used optimally by its owner. Normally, and in good general health, this is the case in most bathrooms.
But what if you have physical disabilities and are restricted in your freedom of movement? Then the bathroom must be equipped according to individual requirements. And in this context, the walk-in shower enters the plan.
Especially with half-sided paralysis as a consequence of a stroke, hurdles, such as a shower tray, can only be overcome with difficulty. With the walk-in shower a great deal of independence is preserved here. In fact, not only can a wheelchair be maneuvered into it, a shower stool set up, or a stabilization aid integrated into the masonry with handholds
even going in and going out is much easier and easy to handle for severely physically disabled people.