The Content Of The Article:
Wet room cleaning for bath and cellarNot every plaster is suitable for use in bathrooms or basements. The prevailing humidity requires special plaster. For cellars, wet room cleaning must always be used.
For domestic use, it is possible to do without wet room cleaning, but it is still recommended to use it.
For example, lime plasters can be used. If the area to be plastered is relatively large in relation to the size of the room, then a clay plaster is recommended. This plaster has the advantage that it can absorb very large amounts of moisture. He then slowly gives it off gradually. Misted mirrors or windows after showering are therefore a thing of the past.
First, the old plaster must be removed. Once this is done, the now uneven wall is pre-wetted and optionally primed. Otherwise, the plaster is not properly adhered to. In addition, the primer seals the wall, preventing it from absorbing too much moisture.
Now some plaster
touched and thrown in Batzen on the wall. These bats are used to attach the cleaning gauges to the wall. The cleaning gauges must be aligned vertically and horizontally with a spirit level to achieve a perfect result. If plastering is to be done around corners, corner rails must still be used to guarantee impact-resistant and clean edges.
The actual plastering
becomes a suitable flush
stirred and applied to the wall with a mason or trowel. If all surfaces between the cleaning gauges are closed, the plaster must be smoothed with a peel gauge over them. This creates a vertical surface. It may be necessary to fill in some places afterwards.
For final smoothing and fine rework a felt board should be used. After the flush has dried sufficiently, the top coat can be applied. The specialized trade holds for this purpose many variants ready. For example, Dekoputz makes it possible to get it in the desired color.