Paint window - instructions & tips


The Content Of The Article:

Paint window - instructions & tips

Happy is who has plastic windows in his apartment or house. Anyone who has wooden windows can not avoid a regular strike action. Decisive for the timing is the age of the wooden windows and the weather-related wear.
Painting is not only important for the look. Decisive is the care given to the wood.
material selection
For painting wooden windows there are special glazes and varnishes. If you want to preserve the natural color of the wood, it is better to use a glaze. These differ for indoor and outdoor use. Paints are mostly used for a colored coating. About glazes you can usually just paint over, with paints the old layer down. When buying, make sure that the products ensure breathability. This achieves the necessary moisture balance. Also beneficial are ingredients that protect the wood from mold and fungus.
Glazes are often absolutely harmless to the health, with paints it is different.
steps
First, profiles, covers and the like are removed. The wooden windows must be sanded off or the old and damaged paint must be completely removed. The windows are to be masked off. Damages are to be repaired and possibly a primer is applied. When painting is often a primer necessary, which must be sanded again before the final coat can be done. When everything has dried well, the adhesive strips will be back
removed and reinstalled profiles, covers and the like.
preparation
First you remove all removable details such as window handles, moldings, etc. Now the
Sanded wooden profiles to achieve a good adhesion of the wood color. It uses sand or emery paper or a small electric grinder. If you have to remove old paint, it is best to first apply a special paint solution and let it act. Then the old paint layer can be relatively easily removed by spatula. Caution is advised in this work because it can produce toxic fumes. Better to work with mouth and nose protection and removing even with eye protection, so goggles.
Subsequently, glass parts and profiles are taped with a painter's crepe. This makes it easier to paint, because you do not have to pay attention.
To brush
It is best to paint with a good brush that adapts to the width of the profile thickness. Specialist dealers sell special brushes for wood stains or varnishes. They allow a good processing of the colors.
The paint must be applied evenly and quite thinly. You always work in the direction of the wood grain. When painting is painted from top to bottom. Drip noses are to be removed immediately before the paint gets stuck, which can be quite fast. Afterwards the drying time must be kept.
Depending on the condition of the wooden windows and the weather conditions they are exposed, it is advisable to apply a primer by means of a primer or a thin primer with the actual wood color. However, this must be sanded again before the final coat is made.
Finally, remove the masking tapes and remount the parts that were removed at the beginning. Of course the windows have to be freshly cleaned again.

Video Board: Donna Dewberry Gallery Glass Window Patterns and Paint K....

© 2019 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map