Aningre - wood, parquet, profile


The Content Of The Article:

Aningre - wood, parquet, profile

Aningre is a hardwood and belongs to the botanical family Sapotaceae. The Aningre tree has several botanical names, the most common being Aningeria altissima and Aningeria robusta.
In Germany and France, the wood is known under the trade name Aningre Blanc.
However, there are other names that depend on the region, so the wood is also led by Aningre Rouge, Mukali, Koando, Osan and Grogoli.
The Aningre tree occurs in its natural distribution in West and East Africa, it is found in Liberia, Ghana and on the Ivory Coast. Several of the botanical species of the closely related genera occur in Africa. The woods are often very similar in structure and coloring.
The tree trunk of the Aningre can reach a size up to 30 meters. On average, the diameter is 0.8 meters, it can be from 0.6 to 1.3 meters. The stem of the tree trunk is straight, the stem foot is due to the root starts sometimes very spannrückig. Up to 16 meters in the Aningre tree, the shafts can be free of branches.
Color and structure of Aningre wood
If the heartwood and the sapwood are still in a very fresh condition, a yellowish-gray color is usually to be seen, which is hardly delimited. During drying and during production
The veneers of Aningre wood often show colors ranging from yellowish to pink to a pinkish gray in the light sections.
At the cracks and intersections a slight greyish to pale reddish brown discoloration is noticeable through an enema. In the species Malacantha alnifolia, Donella pruniformis, Breviea leptospermis and Gambeya begui these yellowish woods are found.
The structure of Aningre wood is characterized by medium-sized and scattered pores, often in longer radial groups. The wood picture
is not affected by the fine rays of wood.
The memory cells are available only on the smooth cross sections and not visible to the naked eye, but you would have to use a magnifying glass to help, so you can see them. On the other hand, you can still see the closely following tangential fine pieces of tape. Also, the growth zones are weak to recognize, which are different depending on the type and location.
In this case, different pronounced stripes may be present in the latewood, which can be seen most clearly on the radial surfaces. The fibers of the Aningre wood are straight, ranging from slightly twisted to locked. Remarkably simple are the mentioned types.
In conclusion, the Aningre wood is for the most part simple and only by the latewood brings the woods in striped colors from a yellowish to a bright pink nuclear color. The only aberrations can be reddish spots that are several inches wide, stripes or even dark bile, sometimes with stripes that are chalky gray.
Buy aningre wood
Aningre Holz is commercially available as round wood from 0.6 to 1.2 meters thick. The lengths of the wood are between four and eight meters. In any dimensions, the block product is offered. In the natural color, which was not treated, peeling and sliced ​​veneers are offered, which can be printed or dyed through.
Surface treatment and use of Aningre wood
The Aningre wood can be treated with all methods and means common in furniture and interior design. In particular, dyeing processes such as through dyeing or printing are used to replace other types of wood, such as walnut.
The Aningre wood is used in interior design, in the frame construction for seating, carved or
strongly profiled furniture parts and for moldings, mostly stained or patinated. Likewise, the wood finds its use as a parquet.

Video Board: 2013 Millennium Prevost H3-45, S4 #0513.

© 2019 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map