The Content Of The Article:
Renovate and refurbish wooden staircaseNo matter how high quality the built-in wooden staircase is, over the years it can become increasingly tattered and unsightly. In this case, you do not necessarily have to remove the wooden staircase and install a new one cost-intensive.
Instead, there are various ways to renovate the wooden staircase more or less consuming and costly.
Wooden staircase renovation by new painting
If the wooden staircase is not irreparably damaged, but has only superficial scratches and furrows, so the sanding and painting can be a good rehabilitation option. The upper clearcoat has to be finished with a fine angle grinder.
However, no excessive pressure must be exerted to avoid damaging the layers of wood underneath the clear coat. However, it is important that the protective varnish is completely removed. This can make a hand grinding necessary especially in corner areas.
Once there is nothing left of the protective layer, the exposed wood must be freed from the sanding dust with a special cleaning agent. An oil treatment, which has to dry well, guarantees a long-lasting freedom from cracks.
Following this, a new protective layer is now added to the wooden staircase. There has to be one
impregnating varnish, which may be both colored, but in most cases transparent to show the typical wood grain.
Special sets for stair rehabilitation
For deeper damage to the wooden stairs, a new coat is no longer enough. In this case
An extensive staircase renovation must be envisaged. So that this does not have to be taken over costly by a specialist, some wood manufacturers offer special stair renovation kits.
These are wooden boards that are precisely cut to size on steps and glued to the wooden staircase. Such systems are only available on order, as the exact dimensions of the stairs must be taken into account.
This type of staircase renovation is of course more expensive than a staircase, but remains priced far behind the refurbishment by a specialist company. Thanks to the detailed cut and the installation instructions enclosed with the complete package, the installation of such renovation systems is absolutely no problem.
If you are gifted with craftsmanship, you can also produce such step superstructures yourself. For this purpose, cut laminate or wooden boards of the desired appearance according to the steps and paste it on. End trim strips provide a handsome edge.