Paint wooden windows - costs & instructions


The Content Of The Article:

Paint wooden windows - costs & instructions

Wooden windows, in contrast to plastic windows, have to be painted more or less regularly. One uses either lacquers or glazes, depending on the type of wood and the desired design.
glazes
Glazes are best if you want to preserve the natural grain of the wood. They are available in many different shades. The consistency can be quite different. Normally, thin-film glazes are used, but thick-layer glazes are also used. These have the advantage that they are drip-inhibited. There are also satin colors, which provide a special finish. Another advantage is that you can paint directly over the last layer of paint, with paint that is usually not so easy. With glazes can be painted over directly. It may be necessary to sand the surface a little with fine sandpaper. The primer for old coatings is also eliminated. The more often you apply a glaze, the more intense the color becomes. Old paintings usually only have to be painted over once. With new windows or sanded wood usually two or even more coats must be planned.
paints
Paints are used for wooden windows when a colored paint is desired, e.g. at white wooden windows. Before starting to paint, it must be made clear that the old paint will repaint the paint. Mostly the old paint has to be removed as much as possible. That works best in the beginning
with a spatula to scrape off the old paint. Remains must be sanded off or pickled. When pickling, there must be additional sanding afterwards, so that the surface is again beautifully even. Whether a primer is necessary, depends on the paint and you will learn from the label of the paint can. The paint should be breathable in any case.
The painting
It is best to hang the window for painting. This is usually not possible. First, the windows are cleaned. This is necessary,
so that any dirt particles can not get into the new coat. Handles and bars are ideally removed for painting or masked with masking tape. The discs are also stuck, so you save the end of the removal of color. The floor should also be covered, it can always drip.
Important are the right brush, a 2.5 cm wide flat brush and a thin round or angle brush for the folds and corners. When buying you should pay more attention to quality than the price. The brushes must not hair, otherwise you have to constantly hair from the window frame.
In lattice windows, first stroke the inner folds and the rungs and then the transverse and vertical frame parts and outer edges. The window frame is finally finished, starting with the frame inside. Afterwards, the windowsill should be painted if necessary. With simple windows you start with the fold, then stroke the insides and finally the outside and outside edges. That's it then. Painting wooden windows is not difficult.
costs
In terms of cost, it depends on whether you cancel yourself or if you order a painter with it. In addition, the color comes in any case.
A painter's hour usually costs between 35 and 40 euros. It just needs to be repainted, this is done quickly. The condition of the windows is crucial. Of course, these have to be ground down or even repaired. In any case, you should get a quote and compare several offers, especially when it comes to large works.
Different in the price are lacquers and glazes, depending on the manufacturer, product characteristics, product base and some more. A liter of thin-film glaze costs about
15 euros, one liter of thick film glaze 25 euros. This is however high quality glaze. Paints are usually in the price between 15 and 25 euros per liter.

Video Board: How to Quickly Prime and Paint Windows.

© 2019 EN.Garden-Landscape.com. All Rights Reserved. When Copying Materials - The Reverse Link Is Required | Site Map