The Content Of The Article:
Seal wooden windows - how it works!Wood in windows is a material that impresses with its naturalness. But this is exactly what will do him wrong. Because wood is subject to natural processes. So it expands in heat, while cold leads to a contraction.
Warped frames and concomitant traction joints can be the result. Without sealing it will not work.
Self-adhesive seals for wooden windows
In the meantime, manufacturers of wooden windows and related accessories are aware of the problems of older models, whether with or without gasket ex works. For this reason, they have brought solutions for the drafts problem on the market. One can be found in the form of self-adhesive gaskets for wooden windows.
In order to install these, it is necessary to know the exact dimensions of window frames and sashes and to cut the sealing strands to the appropriate size. Depending on the design of the window, a choice must be made between an attachment to the casement or to the frame. In some cases, both are possible and should be chosen as a combination.
Now the underground has to be prepared. For this purpose, first an intensive cleaning of dirt and peeling paint or glaze is needed. This is done by means of a spatula and a common soap suds.
In addition, the holds
Self-adhesive seal only when applied to a completely grease-free surface. This requires that the surface to be bonded is degreased with alcohol or turpentine.
To touch the machined area again, the protective film of the gasket is now removed and attached to the substrate under great pressure. It should be paid attention to a straight line. A correction is only possible with loss of service life by removing and re-attaching the seal.
Alternative solution in own construction
Even though the self-adhesive seals for wooden windows are the most cost-effective and simplest solution for the drafts problem, depending on the weather, such seals may have to be quit and replaced after two years.
A longer life is only possible with a workaround from the plastic window competition. This is because seals are produced there, which are wedged in a groove on window frames and sashes.
To do this, remove the wooden window sash and attach a milled seam on all side edges, according to the thickness of the sealing wedge piece. There, the seal takes place without gluing, but by simply pinching their place and holds not only long, but also effective and can be replaced quickly and easily in an emergency.